It can be painful but it shouldnāt take that long. If you havenāt found it in about 10 minutes, it might be worth double-checking your approach logic.
Given the fact Iāve probably gone through a million words trying to find it so far I would probably say yes I should change my approach logic.
Ok, so Iām having some issues using M****S*****, Iām getting a [-] Exploit failed: An exploitation error occurred. Iāve set the user, pass, rhost, rport what am I missing?
Iāve read through this whole thread, still canāt figure out what Iām doing wrong.
I made sure my source ip address is correct, using target uri from the documentation, am using the p**/m**********/r********p payload and am getting this response:
Exploit aborted due to failure: unknown: No tokenCSRF found.
Iāve read through this whole thread, still canāt figure out what Iām doing wrong.
I made sure my source ip address is correct, using target uri from the documentation, am using the p**/m**********/r********p payload and am getting this response:
Exploit aborted due to failure: unknown: No tokenCSRF found.
Can someone point me in the right direction?
The problem is as it is, if you take a 5 minute look at the login page youāll see the issue. For whatever reason or not MS isnāt either providing it or you just missed out on it. I mean you can always just do it manually
Rooted. ngl the enum was literally just one cmd, but must of dropped requests when I did it originally and went down a rabbit hole. Donāt miss anything. You do not need to ābruteforceā anything if you can read.
User: 1 v 1 + the rest of the hints in this thread just make sure its the right one
Root: 5 seconds with the rest of the hints in this thread
The more I read that foothold is right in front of the face the more I want to scream . If anyone would pm me with a nudge it would be greatly appreciated. Been banging my head on this for hours. Thanks in advance.
My current issue is that I get this message in msf and it doesnāt create a session
[] Started reverse TCP handler on CENSORED
[+] Logged in as: f***** (I censored this as well)
[] Retrieving UUIDā¦
[] Uploading xCwhiPoQRB.pngā¦
[] Uploading .htaccessā¦
[] Executing xCwhiPoQRB.pngā¦
[!] This exploit may require manual cleanup of ā.htaccessā on the target
[] Exploit completed, but no session was created.
Am I using the wrong payload or is it a issue I havent thought of yet?
My current issue is that I get this message in msf and it doesnāt create a session
[] Started reverse TCP handler on CENSORED
[+] Logged in as: f***** (I censored this as well)
[] Retrieving UUIDā¦
[] Uploading xCwhiPoQRB.pngā¦
[] Uploading .htaccessā¦
[] Executing xCwhiPoQRB.pngā¦
[!] This exploit may require manual cleanup of ā.htaccessā on the target
[] Exploit completed, but no session was created.
Am I using the wrong payload or is it a issue I havent thought of yet?
Exactly the same problem. I tried all payloads, but nothing helped
This is my very first machine that I am attempting to crack, so please donāt mind the layman language. Also, this is the very first time i am posting for help, so apologies in advance if i break any rules while asking for help.
Iām trying to find the password of the user f***** using brute force, using the script at (Spoiler removed), however, i am being thrown the following error -
(removed)
Is there an issue with the script, or is it the internet. If its the former, can someone point me
in an alternate direction?
This is my very first machine that I am attempting to crack, so please donāt mind the layman language. Also, this is the very first time i am posting for help, so apologies in advance if i break any rules while asking for help.
So the information provided was probably too verbose here.
However, at a very basic level, you need to make sure you have a wordlist, a user name and a host etc.
Then check you havenāt inadvertently changed some of the exploit code.
Is the box stuck? Iāve been doing āsuā but it wouldnāt responds. Although Iāve already resetted the box.
If youāve reset the box, it probably isnāt the problem.
When you try su does it simply do nothing or do you get an error message?
If it doesnāt do anything, your shell might be broken.
Iāve already done resetting the box and it wouldnāt work either. And already switching from EU to US and the same thingā¦the box didnāt respond. And Iāve got no error message. Iāve used the ānewā one for exploiting this box.
Iāve already done resetting the box and it wouldnāt work either. And already switching from EU to US and the same thingā¦the box didnāt respond. And Iāve got no error message. Iāve used the ānewā one for exploiting this box.
If you arenāt getting an error message then something else might be wrong. Are you confident you have a shell which it works in?
Try with an incorrect user name and see it says anything different.
Having no response and not having it switch users is very unusual.
This is my very first machine that I am attempting to crack, so please donāt mind the layman language. Also, this is the very first time i am posting for help, so apologies in advance if i break any rules while asking for help.
So the information provided was probably too verbose here.
However, at a very basic level, you need to make sure you have a wordlist, a user name and a host etc.
Then check you havenāt inadvertently changed some of the exploit code.
Thanks, and noted for future.
I double checked it, and havenāt changed the exploit code. Not too sure whatās going wrong!
My current issue is that I get this message in msf and it doesnāt create a session
[] Started reverse TCP handler on CENSORED
[+] Logged in as: f***** (I censored this as well)
[] Retrieving UUIDā¦
[] Uploading xCwhiPoQRB.pngā¦
[] Uploading .htaccessā¦
[] Executing xCwhiPoQRB.pngā¦
[!] This exploit may require manual cleanup of ā.htaccessā on the target
[] Exploit completed, but no session was created.
Am I using the wrong payload or is it a issue I havent thought of yet?
Exactly the same problem. I tried all payloads, but nothing helped
I saw a comment somewhere saying to set tun0. But that didnāt help mine.