Dante Discussion

1246711

Comments

  • edited September 2020

    Type your comment> @LostatSea said:

    Alright.. after literally a week of trial and error i have the first 2 flags on the .100 node and i'm finally ready to move on with my enumeration.

    I will say this without spoiling anything; the information you will likely find first will lead very quickly to the first 2 flags
    Anyone that needs a nudge feel free to message me.

    You think you can help me I got the first flag but I am stuck on the second initial flag

  • Hey guys, I've made some decent progress but I'm getting a bit caught up on initial shell on NIX02. I found the flag under the M* user and have tried enumerating known files. Could anyone provide a bump in the right direction?

  • Type your comment> @austincoats said:
    > Hey guys, I've made some decent progress but I'm getting a bit caught up on initial shell on NIX02. I found the flag under the M* user and have tried enumerating known files. Could anyone provide a bump in the right direction?

    Feel free to DM me and I can give you a nudge. Send me some info on files you have found.

    limelight

  • Hi, is there anyone working on Dante these days? I am looking for someone wiling to share some ideas / cooperate / help each other. Just send me a PM.
    I have already made some progress (40%), so I can share some info as well.
    THX.

  • Type your comment> @limelight said:

    Type your comment> @smugglebunny said:

    Feel like I have smashed into a wall. I have rooted the below machines, but have yet to find the other network(s). Two of them have interesting entries, but nothing seems to bite when sweeping. Any nudge available without giving too much away?

    DANTE-NIX02
    DANTE-NIX04
    DANTE-WS01
    DANTE-NIX03
    DANTE-DC01
    DANTE-WEB-NIX01
    DANTE-WS03

    Which of these boxes would you think might have connectivity to 'admin' machines listed on the lab write up?

    @limelight I'm in the same situation. Can I DM you with specifics? (Trying not to spoil anything on this thread)

    Hack The Box

  • Type your comment> @0x00Name said:
    > Type your comment> @limelight said:
    >
    > (Quote)
    > @limelight I'm in the same situation. Can I DM you with specifics? (Trying not to spoil anything on this thread)

    Sure, feel free to DM where you are stuck.

    limelight

  • Type your comment> @limelight said:

    Type your comment> @0x00Name said:

    Type your comment> @limelight said:

    (Quote)
    @limelight I'm in the same situation. Can I DM you with specifics? (Trying not to spoil anything on this thread)

    Sure, feel free to DM where you are stuck.

    @limelight sent :) thanks

    Hack The Box

  • Hey is part of the lab that the century machine in the upload in wp asks for a ftp password? or is because the machine was modified y should wait for a reboot?

  • I was wondering the same ^^^

  • Hi all, I'm new to HTB and looking for some guidance on DANTE. I've worked through a couple of the easier HTB boxes but am struggling a little with the foothold for this one. As a noob I've probably thrown myself into the deep end somewhat with DANTE after reading some of the previous comments but I'm up for the challenge. If anyone is willing to help me along please let me know and I'll DM you. Much obliged!

  • Hi, you can DM me for tips. I've completed dante.

    @Ectrix said:

    Hi all, I'm new to HTB and looking for some guidance on DANTE. I've worked through a couple of the easier HTB boxes but am struggling a little with the foothold for this one. As a noob I've probably thrown myself into the deep end somewhat with DANTE after reading some of the previous comments but I'm up for the challenge. If anyone is willing to help me along please let me know and I'll DM you. Much obliged!

  • Presumably you have to get root on DANTE-WEB-NIX01? or is it sufficient to pivot via ssh using the standard user?

  • Type your comment> @shaunography said:

    Presumably you have to get root on DANTE-WEB-NIX01? or is it sufficient to pivot via ssh using the standard user?

    You must root for a flag, but I would look into using sshuttle to pivot which does not require root creds. one of the other user creds you have found is static and will work for all of the remaining tasks in the lab.

    limelight

  • Type your comment> @sT0wn said:

    Hi, you can DM me for tips. I've completed dante.

    @Ectrix said:

    Hi all, I'm new to HTB and looking for some guidance on DANTE. I've worked through a couple of the easier HTB boxes but am struggling a little with the foothold for this one. As a noob I've probably thrown myself into the deep end somewhat with DANTE after reading some of the previous comments but I'm up for the challenge. If anyone is willing to help me along please let me know and I'll DM you. Much obliged!

    Cool! Thanks..

  • somebody defaced the main .100 site with their shell :|

  • Hi can anybody offer some assistance with pivoting using chisel. Have it working great for first pivot, but struggling to make the jump to the additional subnet.

    Thanks

  • you can pm me about this> @richeze said:

    Hi can anybody offer some assistance with pivoting using chisel. Have it working great for first pivot, but struggling to make the jump to the additional subnet.

    Thanks

  • edited October 2020

    I'm stuck on sql and nix05/nix6 boxes. Can I pm anyone? --edit I typo'd a password

  • is the initial machine down? i can't access the inital foothold machine no more

  • Alright guys I'm at my wits end. Is there anyone out there than can PM me the syntax for getting my remote ssh tunnel to work? I've been trying for hours to throw a shell from 102 > 100 > kali. I'd be happy to tell you what I've tried so far. Not looking for spoilers - but I'd really appreciate a hand with my ssh -R issue.

  • Sure, pm me. I've completed dante.

  • Anyone mind to give me a nudge on DANTE-WS03. I've already found user and i've got shell access. But i'm a bit stuck now, found a possible path to root, but can't get i to work.
    Can i PM someone ?

  • edited October 2020

    Anyone that can give me a hint? I found the first flag pretty quick. Done some enumeration on the first box and got some data, but cannot seem to move forward on any of the available ports except for one of them, which I got a file there.

    Tried some basic combinations of passwords for one user, but no luck. Any hints? Thanks!

  • Type your comment> @Th3Punish3r said:

    Anyone that can give me a hint? I found the first flag pretty quick. Done some enumeration on the first box and got some data, but cannot seem to move forward on any of the available ports except for one of them, which I got a file there.

    Tried some basic combinations of passwords for one user, but no luck. Any hints? Thanks!

    You can send me a p.m.

  • edited November 2020

    Never mind =) Solved

  • edited November 2020

    Is anyone that has successfully escalated ws03 willing to give me a pointer? I'm stuck trying to move up to Administrator. I've got an idea that I've been working towards most of the day - but I can't get it to work correctly on the machine.

    Edit - nevermind. Rooted it.

  • Hello all. In need of some help escalating ws03. Got user and a shell but need some tips on how to progress. Thanks.

  • You can pm me.
  • Hi, I've rooted DANTE-WEB-NIX01 but I can't escape this machine and jump into another one. Could I ask you for any hint?

  • I have miss one last flag for "Again and again", can anyone point me in the right direction? Thanks

Sign In to comment.