Cannot reach any machines with vip account

I just downloaded my ovpn file and connected to htb using:

sudo openvpn myuser.opvn

I have two ISPs and can’t reach any machines while connected via openvpn over either network. Same results on both.

The end of openvpn connection output:

Wed Apr 15 15:04:15 2020 ROUTE_GATEWAY 192.168.1.1/255.255.255.0 IFACE=wlan0 HWADDR=f8:16:54:2d:2a:df
Wed Apr 15 15:04:15 2020 GDG6: remote_host_ipv6=n/a
Wed Apr 15 15:04:15 2020 ROUTE6: default_gateway=UNDEF
Wed Apr 15 15:04:15 2020 TUN/TAP device tun0 opened
Wed Apr 15 15:04:15 2020 TUN/TAP TX queue length set to 100
Wed Apr 15 15:04:15 2020 /sbin/ip link set dev tun0 up mtu 1500
Wed Apr 15 15:04:15 2020 /sbin/ip addr add dev tun0 10.10.14.43/23 broadcast 10.10.15.255
Wed Apr 15 15:04:15 2020 /sbin/ip -6 addr add dead:beef:2::1029/64 dev tun0
Wed Apr 15 15:04:15 2020 /sbin/ip route add 10.10.10.0/24 via 10.10.14.1
Wed Apr 15 15:04:15 2020 add_route_ipv6(dead:beef::/64 → dead:beef:2::1 metric -1) dev tun0
Wed Apr 15 15:04:15 2020 /sbin/ip -6 route add dead:beef::/64 dev tun0
Wed Apr 15 15:04:15 2020 WARNING: this configuration may cache passwords in memory – use the auth-nocache option to prevent this
Wed Apr 15 15:04:15 2020 Initialization Sequence Completed

Truncated results of ifconfig:

tun1: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500
inet 10.10.14.43 netmask 255.255.254.0 destination 10.10.14.43

Results of ping seem odd to me, but either way, host unreachable:

ping 10.10.10.148
PING 10.10.10.148 (10.10.10.148) 56(84) bytes of data.
From 10.10.14.1 icmp_seq=1 Destination Host Unreachable
From 10.10.14.1 icmp_seq=2 Destination Host Unreachable
From 10.10.14.1 icmp_seq=3 Destination Host Unreachable

traceroute ends at 10.10.14.1:

traceroute 10.10.10.148
traceroute to 10.10.10.148 (10.10.10.148), 30 hops max, 60 byte packets
1 10.10.14.1 (10.10.14.1) 8.845 ms 8.829 ms 8.822 ms
2 10.10.14.1 (10.10.14.1) 3021.777 ms !H 3021.805 ms !H 3021.804 ms !H

additionally can’t browse to 10.10.10.148 or any other 10.10.10.*

Any help would be much appreciated.

From time to time I’m having this issue as well. I don’t really know how to solve this.

Did you figure this out ?